Protecting your property from water damage should be a top priority for homeowners. One effective way to achieve this is by ensuring that your roof is properly equipped with high-quality flashing.
Roof flashing is a strip of material that is usually installed to divert water away from your roof. Though flashing is a very small part of your roof, it plays a vital role in preventing water intrusion and protecting the structure of your roof from damage. Flashing is used to create a watertight seal around areas prone to leaks, such as chimneys, vents, skylights, and valleys.
In this blog post, we will explore the most common types of roof flashing and their respective functions. By understanding these components, you will gain valuable insights into the importance of proper flashing installation and maintenance.
Types of Flashing Found on Roofs
#1 Base Flashing (Apron Flashing)
When we talk about the popular types of flashing for roofs, base flashing will surely make the list. This flashing is used on almost every roof. Coming to specifics, base flashing is a long strip of metal or flexible material that is installed at the point where the roof meets a vertical surface, such as a wall or chimney. This is the go-to type of flashing if you have roof dormers. Without base flashing, water could seep through these intersections, leading to damage to your home’s interior, including mold growth, rot, and structural issues.
It will typically consist of a large piece of metal that extends up the vertical surface and folds over the roof plane. At the bottom edge, it will be bent outward at a 90-degree angle to form an “apron” that sheds water away from the vertical surface. The flashing can be customized to fit the unique contours of the vertical surface, ensuring a snug and secure fit. Base flashing is generally installed before the shingles are laid.
#2 Step Flashing
Step flashing is an integral roof-to-wall flashing type that works hand-in-hand with base flashing to provide a comprehensive defense against water infiltration.
Imagine a scenario where your roof meets a vertical surface like a wall or chimney – each row of shingles or tiles creates a potential entry point for water if not properly sealed. Step flashing is designed to address this vulnerability by overlapping each row of roofing material, creating a seamless and continuous waterproof barrier. So rainwater will go down the walls and not underneath your shingles.
This type of flashing is made of singular metal pieces sewn together where the roof’s edge meets the vertical wall surface. It interlocks with the base flashing to form a cohesive system.
#3 Counter Flashing
Counter flashing will work in conjunction with other types of flashing to provide a continuous waterproof barrier. This type of roof flashing is installed after the base and step flashing. It’s a separate piece of metal that covers the top edge of the base flashing (like step flashing).
The biggest point where counter flashing differs from other types of flashing is that it is secured directly into the masonry or brick. Counter flashing will prevent water from getting between the base flashing and the vertical surface. You will commonly see counter flashing used with chimney flashing, at roof-to-wall intersections, and anywhere else base flashing meets a vertical surface.
Since it is installed onto existing masonry, the installation can be quite difficult and it is important that you hire a professional roofing company for the job.
#4 Drip Edge Flashing
Drip edge flashing is an essential component of your roof’s water-shedding system. It is a long, angled piece of metal installed along the eaves and rakes (gable edges) of your roof. The drip edge extends out slightly past the edge of the roof deck, creating a small overhang that directs water away from the fascia and into the gutters.
This type of flashing gets its name from the shape formed by this small overhang, allowing water to properly “drip” off the roof edge instead of running back underneath. It prevents water from seeping behind the roof sheathing and causing rot or water damage. Despite its simple appearance, drip edge flashing plays a crucial role in channeling rainwater off and away from your roofing structure.
With this, we finish the list of different types of roof flashing. However, keep in mind these are not the only types available. In the next section, we will talk about the areas where flashing is used and why.
Different Areas Where You Should Install Flashing On A Roof
Vent Pipe Flashing
Any vent pipes protruding through your roof require vent pipe flashing to seal the openings. This type of flashing is usually made of a flexible material, like rubber or plastic, that can be molded around the pipe’s shape. It creates a watertight seal while allowing for thermal expansion and contraction.
Chimney Flashing
Chimneys are another common area where flashing is required. Chimney flashing will typically consist of a combination of step flashing, counter flashing (installed against the chimney), and a cricket (a small, peaked structure) to divert water away from the chimney.
Valley Flashing
Valley flashing is installed in the valleys of your roof, where two sloping roof planes intersect. These areas are particularly vulnerable to water intrusion, so proper valley flashing is essential. It is typically made of galvanized steel or aluminum and shaped like a “V” to channel water down and off the roof.
Skylight Flashing
If you have skylights on your roof, proper flashing is essential to prevent leaks. Skylight flashing is similar to chimney flashing, with step flashing along the sides and a special flashing kit designed to seal the skylight’s curb or frame.
Popular Roof Flashing Materials
While the basic types of roof flashing are the same, there are several different materials that you can use, each with its own pros and cons. Here are some of the most common flashing material options:
Galvanized Steel
One of the most affordable and readily available options, galvanized steel flashing is coated with zinc to help prevent rust and corrosion. It provides decent longevity and works well in many environments, though it can eventually rust over time, especially in coastal areas.
Aluminum
Lightweight, rust-resistant, and reasonably priced, aluminum is another popular flashing material choice. It tends to hold up better than galvanized steel against the elements. However, the lifespan of aluminum is not as impressive due to its lighter weight. So you may need to replace it more often.
Copper
If you’re looking to enhance your home’s elegance and value, copper is the top choice. Over time, copper develops a unique patina, further enhancing its visual appeal. It naturally shields against further corrosion as well. Copper flashing can last over 100 years, making it a wise long-term investment. However, copper roof flashing is more expensive than other materials.
Still Confused About Which Type Of Flashing To Consider? Ask Our Experts!
As you can see installing roof flashing is as essential as choosing the right roofing shingle for your roof. But every home has its unique needs. If you are still confused about which type of flashing is the best or which material should be used, don’t worry, we can help.
Our roofers at Prestige Roofing have years of experience in installing new roofs as well as repairing old systems and can help you make the best decision.
Contact us today at (920) 791-0414 to learn more.